Aerial Firefighting System - Suspended Stainless Steel Helicopter Bucket
Engineered for helicopters with a minimum load carrying capacity of 3,000 kg on the suspension lock (adapted for Mi-8, Mi-8MTV, and Mi-171Sh). Opened and closed via compressed air for rapid filling and complete or partial discharge.

Built with marine-grade stainless steel and Festo pneumatics for high-speed operations up to 120 km/h without tilting back or leaving the operator's line of sight.
| Load on the Lock (Gross) | 2,640 kg |
|---|---|
| Usable Volume | 2,311 – 2,315 lit. |
| Tare Weight | 329 kg |
| Dimensions (Ø × H) | 1,680 mm × 1,550 mm |
| Material | Stainless Steel W.Nr 1.4404 / AISI 316L |
| Pneumatics | Festo Compressed Air System |
| Filling Time | ~ 3 sec |
| Discharge Time | 3 sec (supports 2–3 partial drops) |
| Dispersed Water Track Width | 10 – 13 m (up to 120 km/h operating speed) |
Finely dispersed water (0.9 dispersion factor vs. 0.2–0.3 in conventional buckets) maximizes coverage and eliminates destructive "water bombing" impact.

Designed for wildland suppression, delicate urban environments, environmental spill response, and emergency personnel rescue.

Effective across forests, cereal fields, orchards, olive groves, macchia, and dense underbrush with wide 10–13 m dispersion tracks.

Fine dispersion eliminates the "water bombing" effect, posing no structural threat to warehouses, factories, skyscrapers, marinas, ships, or resorts.

Attach a fire hose to the release valve to supply water to firefighters (stirrup pumps), people, and animals, or disperse coagulants over oil spills.

In critical situations, lowering the bucket into the affected zone enables the safe extraction and lifting of 2–3 firefighters.
Fills in just 3 seconds from backwaters, ponds, gravel pits, lakes, seas, and pools with a minimum depth of 1.5 m.
When hovering over seawater, long suspension wire ropes keep the helicopter safely above corrosive salt-water spray eddies, protecting engines and airframe components.

Comparing conventional helicopter firefighting buckets against the patented Flory 26 stainless steel system.
| Features of Existing Buckets | Advantages of the FLORY 26 Bucket |
|---|---|
| Small aperture for filling and discharge | Big aperture for rapid filling and discharge |
| Slow filling/discharge time (5–8 s) | Fast filling/discharge time (3 s) |
| High opening/closing forces required | Low opening/closing forces via compressed air |
| Low dispersion factor (0.2–0.3) & narrow track width — targets can be easily missed | High dispersion factor (0.9) & wide 10–13 m track width — targets cannot be missed |
| Long opening/closing cycle; cannot open/close repetitively on one fill | Short, interruptible cycle — one fill can be emptied in 2–3 repeated drops |
| Tilts back during discharge due to low tare weight, disappearing from operator sight and forcing speed reduction over fire zones | Optimum tare weight prevents tilting back; remains in operator sight so pilots maintain safe flight speed over fire zones |
| Buckets do not float | Floatable design — floats on the water surface if released |
| No integrated system for foams or retardants | Integrated dosing system for foams (increasing extinguishing efficiency up to 300%) and retardants |
| Short wire ropes expose aircraft to corrosive salt-water mist | Long wire ropes protect the helicopter from corrosive salt-water mist (short ropes also available) |
| Low summative coefficient of "expensive water" consumption | "Expensive water" efficiency factor is 2–3× higher than other buckets worldwide |
| Low dispersion prevents effective oil-spill coagulant application | High dispersion enables efficient deposition of coagulants over marine oil spills |
| No valve for ground water discharge | Fitted with a release valve for attaching fire hoses on the ground |
| No capability to evacuate personnel | Can lift 2–3 firefighters in emergency rescue situations |
| Materials not resistant to salt water | Marine-grade AISI 316L stainless steel ensures long-term salt-water durability |