FLORY 26

Aerial Firefighting System - Suspended Stainless Steel Helicopter Bucket

Engineered for helicopters with a minimum load carrying capacity of 3,000 kg on the suspension lock (adapted for Mi-8, Mi-8MTV, and Mi-171Sh). Opened and closed via compressed air for rapid filling and complete or partial discharge.

FLORY 26 helicopter bucket in front of helicopter
2,315 L
Usable Volume (2,311–2,315 l)
3 sec
Filling & Discharge Time
0.9
High Dispersion Factor
AISI 316L
Salt-Water Resistant Steel
Specifications & Performance

Technical Data

Built with marine-grade stainless steel and Festo pneumatics for high-speed operations up to 120 km/h without tilting back or leaving the operator's line of sight.

Load on the Lock (Gross)2,640 kg
Usable Volume2,311 – 2,315 lit.
Tare Weight329 kg
Dimensions (Ø × H)1,680 mm × 1,550 mm
MaterialStainless Steel W.Nr 1.4404 / AISI 316L
PneumaticsFesto Compressed Air System
Filling Time~ 3 sec
Discharge Time3 sec (supports 2–3 partial drops)
Dispersed Water Track Width10 – 13 m (up to 120 km/h operating speed)

Water Density by Flight Speed (10–13 m Width)

Finely dispersed water (0.9 dispersion factor vs. 0.2–0.3 in conventional buckets) maximizes coverage and eliminates destructive "water bombing" impact.

~30 l/m² at 0 km/h (Hover)
~4.5 l/m² at 50 km/h (14 m/s)
~2.3 l/m² at 100 km/h (26 m/s)
Technical view of FLORY 26 stainless steel aerial firefighting bucket

Key Engineering Highlights

  • Multi-Drop Control: Compressed air opening/closing allows complete or partial discharge across 2–3 targeted drops from a single fill.
  • In-Flight Dosing System: Capable of dosing foams (boosting extinguishing efficiency up to 300%), fire retardants, and oil-spill coagulants during flight.
  • Ground Hose Release Valve: Fitted with a dedicated release valve to attach standard fire hoses on the ground.
  • Floatable Safety Design: Floats on water if emergency release is required, and maintains optimal tare weight so it never tilts back out of pilot view.
  • Flexible Suspension Options: Configurable with short steel wire ropes for freshwater or long steel wire ropes for seawater operations.
Operational Versatility

Applications & Water Taking

Designed for wildland suppression, delicate urban environments, environmental spill response, and emergency personnel rescue.

Aerial view of wildfire suppression

Wildfires

Effective across forests, cereal fields, orchards, olive groves, macchia, and dense underbrush with wide 10–13 m dispersion tracks.

Firefighters responding to an urban fire

Urban & Industrial Fires

Fine dispersion eliminates the "water bombing" effect, posing no structural threat to warehouses, factories, skyscrapers, marinas, ships, or resorts.

Water discharging through the FLORY 26 release valve

Water & Chemical Delivery

Attach a fire hose to the release valve to supply water to firefighters (stirrup pumps), people, and animals, or disperse coagulants over oil spills.

Firefighters in the FLORY 26 bucket during emergency rescue

Emergency Rescue

In critical situations, lowering the bucket into the affected zone enables the safe extraction and lifting of 2–3 firefighters.

1.5 m Required Depth

Rapid Water Taking Anywhere

Fills in just 3 seconds from backwaters, ponds, gravel pits, lakes, seas, and pools with a minimum depth of 1.5 m.

When hovering over seawater, long suspension wire ropes keep the helicopter safely above corrosive salt-water spray eddies, protecting engines and airframe components.

FLORY 26 bucket water dispersion
Side-by-Side Comparison

Why Choose FLORY 26?

Comparing conventional helicopter firefighting buckets against the patented Flory 26 stainless steel system.

Features of Existing BucketsAdvantages of the FLORY 26 Bucket
Small aperture for filling and dischargeBig aperture for rapid filling and discharge
Slow filling/discharge time (5–8 s)Fast filling/discharge time (3 s)
High opening/closing forces requiredLow opening/closing forces via compressed air
Low dispersion factor (0.2–0.3) & narrow track width — targets can be easily missedHigh dispersion factor (0.9) & wide 10–13 m track width — targets cannot be missed
Long opening/closing cycle; cannot open/close repetitively on one fillShort, interruptible cycle — one fill can be emptied in 2–3 repeated drops
Tilts back during discharge due to low tare weight, disappearing from operator sight and forcing speed reduction over fire zonesOptimum tare weight prevents tilting back; remains in operator sight so pilots maintain safe flight speed over fire zones
Buckets do not floatFloatable design — floats on the water surface if released
No integrated system for foams or retardantsIntegrated dosing system for foams (increasing extinguishing efficiency up to 300%) and retardants
Short wire ropes expose aircraft to corrosive salt-water mistLong wire ropes protect the helicopter from corrosive salt-water mist (short ropes also available)
Low summative coefficient of "expensive water" consumption"Expensive water" efficiency factor is 2–3× higher than other buckets worldwide
Low dispersion prevents effective oil-spill coagulant applicationHigh dispersion enables efficient deposition of coagulants over marine oil spills
No valve for ground water dischargeFitted with a release valve for attaching fire hoses on the ground
No capability to evacuate personnelCan lift 2–3 firefighters in emergency rescue situations
Materials not resistant to salt waterMarine-grade AISI 316L stainless steel ensures long-term salt-water durability

Ready to simplify your processing?

Let us help you. Describe your needs as best you can with the help of the form below. Our friendly staff will contact you with helpful suggestions and describe the next steps.

1) You order a tank.

You receive our quote and decide whether you want to change it. If you're satisfied, we move onto the design and engineering phase.

2) We design it.

You give us inputs based on the drawings we send you. It is an iterative process and we only stop when you're 100% satisfied.

3) You approve the plans.

You sign the final version of the drawing and email it to us. We then schedule the tank for manufacture. You still have some time for making small changes.

4) We manufacture it.

Your final tank design enters the production line. It is assembled from high-grade stainless steel using advanced welding techniques.

5) You take delivery.

Your tank is shipped out to you, including a manual and proper maintenance guide. We'll always be there for you to provide assistance.

[EN] Request a Quote